PM Black Earthenware Clay 27.6lb (Cone 06 - 05) manikins Adding colouring pastes is recommended

Adding colouring pastes is recommended outdoors in order to hide the yellowing effect

A very fine grog makes for a more forgiving body with a slight texture and minimal speckling

if heat application is desired)

shrink plastic

Apply with a spatula or putty knife

PM Black Earthenware Clay 27.6lb (Cone 06 - 05) manikins Adding colouring pastes is recommendedBlack Earthenware Clay Black earthenware clay body. Its black color in oxidizing atmosphere is a highlight in the range of low firing colors. Its fineness and plasticity make it an excellent choice for throwing and modelling. Very good behavior with standard pottery glazes. Available in extruded body (moist form), being suitable for wheel throwing, shaping and modeling. Firing range: Cone 06 05 (1855 1911F) Water content: 21% Plasticity (IP