EZCellGene® GL45 Cap Assembly for 250mL Bottle with small bore Overmolded Silicone tubing 1/16" ID x 3/16" OD, 20/CS Connector Type:Plug SKU/Product Code: 25C-3610-FLS

SKU/Product Code: 25C-3610-FLS

23oz) Bottle Width 2

10in (155mm) Volume 4L Bottle Material HDPE Cap Material Polypropylene OD Tubing Ports 4 x 1/8" and 4 x 1/4" Hose Barb 0 Filter Length 6

platinum-cured Membrane Polyethylene (standard version) Springs 316 Stainless Steel Sterilization: Gamma Up to 50 kGy irradiation Temperature One Cycle Up to 130°C for 60 minutes CV Value: Cv~30-57 Cv values represent the approximate expected flow rate in gallons per minute of water at room temperature for a 1 PSI pressure drop

and a standard internal Luer tape to fit a male barb adapter

EZCellGene® GL45 Cap Assembly for 250mL Bottle with small bore Overmolded Silicone tubing 1/16" ID x 3/16" OD, 20/CS Connector Type:Plug SKU/Product Code: 25C-3610-FLSEZCellGene GL45 Cap Assembly for 250mL Bottle Ready to Use, Leak Free, Precise Flow Control The EZCellGene GL45 wide mouth media Bottle Assembly from Foxx Life Sciences is a single use, preconfigured solution designed to simplify media and reagent delivery in bioprocessing and cell culture workflows. Each Assembly features VersaCap technology with two integrated 1 16" ID hose barbs one for vent filtration and the other configured for fluid transfer.