21' Steering Cable Ballast 10 Channel -Standard

10 Channel -Standard

NOTE: this is a specific bolt with a magnet at the end

won’t hold position

Part Number: RP061022

or an upgrade if you’ve added weight from board racks

21' Steering Cable Ballast 10 Channel -StandardNeed to determine which cable to purchase? The steering cable part number should be printed in white letters on the cable about 1 2 feet from the rack. The cable length is indicated by the last two digits of the part number. Example SSC13415 is a 15 cable. If you are not able to find the part number, you will need to remove the cable and measure the cable. To do so measure the plastic cable jacket in inches and add 30 to that number and then round up