1/4, 3/8, 1/2 Inch Drive 90-Tooth Dual-Direction Micrometer Torque Wrench Set, 3-Piece (20 - 200 in-lb, 10 - 100 ft-lb, 40 - 200 ft-lb) Quantity:1 has varying thickness across the

has varying thickness across the tool because the plating thickness depends on the electric current density at each point on the tool • Manufactured in Michigan – Tekton flare nut crowfoot wrenches are made entirely in the USA with USA-sourced materials

preventing round-off • Includes shallow and deep length sockets • Extra-large die-stamped size markings are easy to read and can’t wear off • Polished

Part Number: assortment-kit-541905 Pieces - Coarse Thread

they remain lean and optimized for the job—no adjustments

Part Number D/ACOQ

1/4, 3/8, 1/2 Inch Drive 90-Tooth Dual-Direction Micrometer Torque Wrench Set, 3-Piece (20 - 200 in-lb, 10 - 100 ft-lb, 40 - 200 ft-lb) Quantity:1 has varying thickness across theAccurate within 3% for Both Directions The actual calibration accuracy will be stated on the certificate for your wrench, but will be no worse than 3% Full Range Calibration Using the ISO Standard Since each torque wrench is calibrated to the ISO standard, it also meets and exceeds the ASME standard Serialized Certificates of Calibration Each wrench includes a certificate that shows serial number, test results, and test equipment and conditions 90