H315 Bearing Adapter Sleeve with Lock Nut & Washer Timing Pulley-1 you will receive a 10

you will receive a 10 meter roll uncut

Length : 1 m = 39

AK40-1" Bore Solid Sheave Pulley with 3

No lateral whip

Bore:7/8" inch

H315 Bearing Adapter Sleeve with Lock Nut & Washer Timing Pulley-1 you will receive a 10H315 Bearing Adapter Sleeve with Lock Nut & Washer Parameter Typical Value Description Designation H315 Suitable Shaft Diameter (d) Usually around 75 mm (common for H315) Adapter Sleeve Bore Diameter (d1) Slightly larger than shaft diameter, e. g., ~80 mm Thread Size (Lock Nut) Typically M802 (confirm exact with supplier) Width of Sleeve (B) Approximately 5055 mm Lock Nut & Washer Included to fix the sleeve securely Material Hardened steel, case