Narrow Forged Johnny Joint 2 Inch 1.600 Inch X 0.562 Inch Ball 3/4 Inch-16 Shank Externally Greased Each RockJock 4x4 Variant:Right Hand Threaded 5 inch Components

5 inch Components

Adjustable dwell / duty-cycle output

5 Inch from center of splined hole to center of 1/2 Inch hole

800 rpm in 200 rpm increments

The angled flush mount allows you to easily mount to a flat surface by only drilling three small holes

Narrow Forged Johnny Joint 2 Inch 1.600 Inch X 0.562 Inch Ball 3/4 Inch-16 Shank Externally Greased Each RockJock 4x4 Variant:Right Hand Threaded 5 inch ComponentsRockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushing that encases the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained with 2 heavy